We are Manufacturer, Supplier, Exporter of Hot Runner Mould Heaters. Our setup is situated in Pune, Maharashtra, India.
Applications of Hot Runner Mould Heater :
- Hot Sprue Bushings
- Sealing Bars & Dies
- Hot Metal Forming Punches
Features of Hot Runner Mould Heater : :
- Fiberglass, Stainless-steel Armour & Stainless-steel Braid Lead Options
- A wide range of lengths are available up to 2000mm.
- Optional built-in-type 'J' Thermocouple.
- Flat, Square or Round profiles.
Sheath Material |
High-Nickel Alloy ( CrNi-Stell, Material No: 1.4541 ) |
Heating Conductor |
Nickel / Chromium ( NiCr 8020, Material No: 2.4869 ) |
Insulation Material |
Highly Compressed magnesium Oxide ( MgO ) |
Voltage Range |
240-250V ac |
Leakage Current |
<0.5mA |
Insulation Resistance |
Approx. 10MOhms |
Wattage tolerance |
+/- 10% |
Thermocouple |
Type' 'J' Fe/CuNi |
Standard Cold Length |
2.2 x 4.2 = 90mm, 3.2 x 3.2 = 100mm, 3mm dia = 150mm |
Max. Operating Temp. |
5000 |
Min. Forming Radius |
Flat : 2.2 x 4.2 = 5.00mm, 1.8 x 3.2 = 4.00mm Square : All sizes = 6.00mm Round : 4.0 = 6.0mm, 3.0 = 4.00mm |
Cross Sections
Coils are available with flat, Square and round cross-sections. The dimensions are as follows :
| Flat | 2.2 x 4.2mm | 1.8 x 3.2mm |
| Square | 3.0 x 3.0mm | 3.2 x 3.2mm |
| Round | 4.0mmdia | 3.0mmdia |
Note : Size marked with an * are the most popular and kept in stock. Most stock items have integrated thermocouples.
| Size | 3.3 | 3.83 | 3.3 x 3.3 | 2.2 x 3.8 |
| Cross Section | o | o | | |
| Cold Zone | 3.3 | 3.8 | 3.8 | 3.3 |
| Adapter Diameter | 7.5 | 7.5 | 7.5 | 7.5 |
| Adapter Length | 32 | 32 | 32 | 32 |
| Crimp Diameter | 9.5 | 9.5 | 9.5 | 9.5 |
| Maximum Length | 2000 | 3000 | 3000 | 2000 |
| Maximum Current | 5A | 5A | 5A | 5A |
| Minimum Diameter | 8 | 10< | 8< | 6 |
Reach Us
-
Plot No.T - 204, Gala No.A - 14, Pavana Inustrial Premises Co. Op. Ltd. Near MIDC Post Office, MIDC,
Bhosari, Pune - 411026, MH., India. -
+91-20-27129213 / 27121399
+91 - 98220 48771, 98220 20483 -
Vishwesh Heaters Pvt. Ltd.